How to use it as soon as the iPhone 13 freezes

How to use it as soon as the iPhone 13 freezes

If you get a shiny iPhone 13, let's learn the basics first.As everyone knows, the hardware does not move perfectly, no matter how latest and the best products.Therefore, not only the power -on and shutdown method, but also forced restart.You should also know how to start and end the recovery mode, how to change the firmware when it doesn't work in recovery mode.

How to shut down the iPhone 13

This is easy.To shut down the iPhone 13, just scroll down with "Settings" and "General" and select "End System".Alternatively, press and hold the volume down button at the same time, and when the three sliders are displayed on the screen, select "Slide and turn off".Conversely, to turn on the iPhone 13, press and hold the side button until the Apple logo is displayed.

How to forcibly restart iPhone 13

Once your iPhone is solidified, restart your iPhone 13.Press the volume up button and volume down button, then press the side button until the screen disappears.A few seconds later, the Apple logo is displayed and the iPhone 13 is restarted.

How to start and end recovery mode with iPhone 13

If the Apple logo is solidified while the iPhone 13 is on (no progress bar) or the red or blue screen, the iPhone must be recovered in recovery mode. not. With the recovery mode, you can connect the hardened iPhone to the computer to restore the software and operating status. Here, I would like to touch on the importance of backup of regular iPhone. If you try recovery mode or other methods for iPhone recovery, you may have to ask Apple Support to exchange. In that case, you will regret if there is no backup. To make iPhone 13 in recovery mode, connect to a PC or Mac. In the case of a PC, or a Mac equipped with a macOS before Mojave, it is necessary to install iTunes. If you are a Mac equipped with MacOS after Catalina, just open the Finder. When you connect to a computer, you will be asked if you trust the computer on the iPhone screen. Tap "Trust" and enter the passcode when requested. Once the iPhone is connected to the computer, press the following keys one by one. Volume up, volume down, hold and hold side buttons. After a long press, a computer and cable picture will be displayed on the iPhone screen. Also, on the computer side, a pop -up opens and asks if the iPhone is updated or restored. Click "Update" and wait for the iPhone to be updated and restarted. To get out of the recovery mode manually, press and hold the side button until the computer and cable icon disappears from the iPhone display.