Let's play with "Raspberry Pi3 Model B"! Part4

Install Windows 10 IoT Core in Raspberry Pi3

　Windows 10 Iot Core is a kind of Windows 10 family announced as replaced by Windows Embedded.There are three editions, "Enterprise", "Mobile Enterprise", and "Core/Core Pro", which will operate from 256MB/2GB this time.

　As of June 2016, there are four types of hardware that support Windows 10 Iot Core: Raspberry Pi2, Raspberry Pi3, Dragonboard 410C, and Minnowboard Max.Only Raspberry Pi3 is the Insider Preview version.

　According to the installation method on the net, it seems that there was a slightly different pattern in the past, but it is now integrated into "Windows 10 IoT Core Dashboard" so that it does not take extra time.You can download here.

　Raspberry Pi2, Dragonboard 410C, and Minnowboard Max are already RTMs, and if you select a device type on Windows 10 Iot Core Dashboard, you can write to the microSD card (DRAGONBOARD 410c is a little different), but this time.The Raspberry Pi3 is still an unfinished Insider Preview version, so it must be downloaded separately.The download page is here (required to participate in Windows Insider).Build downloaded 14342, with two types, 14342 and 14328, saying, "I would like a new one."However, this is the source of the trouble described later ...

　If you download the ISO file and mount it with Windows 10, Windows_10_iot_core_for_rpi2.There is MSI, double click and setup.

　After the end, flash to C: \ Program Files (x86) \ Microsoft IoT \ FFURASPBERRYPI2.ffuができるので、Windows 10 IoT Core Dashboardの新しいデバイスのセットアップ > デバイスの種類をカスタムへ設定し、[参照]ボタンで先のflash.Specify the FFU, and if there is no mistake in the writing destination drive, the writing starts with [Install].If you set this in Raspberry Pi3, you will be ready.

　The acquisition and writing method of image files are different from Part3, but what you do is exactly the same.There is no particular difficulty.