• 19/08/2022
  • homesmartjp
  • 1312 Views

The iPhone silicon case is the best.Ring and detachment can be used for MAGSAFE

When

After the purchase of "iPhone 12 Pro Max", I tried and errored the case of the main unit, but ultimately the genuine Apple "Magsafe compatible iPhone 12 Pro Max Silicone Case" and the bass plate that can detach smartphone rings with Magsafe.I arrived at the conclusion that it was the best.Magsafe is an accessory attached to the back of the iPhone 12 series.In addition to supporting wireless chargers, you can attach cases and accessories.If you attach a smartphone ring, wireless charging such as MAGSAFE often does not work, but by using a genuine silicone case and a base plate for Magsafe, you can remove the smartphone ring when charging, and install it when necessary.It will be.

Magsafe non -support is backfired

I often drop my iPhone on the ground, so cases, protective films, smartphone rings, etc. are essential.I purchased the iPhone 12 Pro Max last year, but the purchased silicon case was non -genuine and did not support Magsafe.Initially, Magsafe was not using a dedicated charger because it was expensive, but intended to use wireless charging with Qi.The smartphone ring was also made of Zirconia and was able to charge wirelessly (although some chargers could not do).

However, the smartphone ring is broken easily in about six months.Originally, it was not a very accurate product, but one day it suddenly broke from the root.When this happens, it's a bit lost to re -purchase the same product.However, wireless charging is no longer possible with metal smartphone rings.However, it was difficult to use without smartphone rings, so I purchased a metal one for the time being and had a wired charging life for a while.

Smartphone ring is removable

When I was looking for a solution, there was a "MAG-SAFE compatible base plate" that can "remove" smartphone rings using Magsafe magnetic force, so I purchased it.Generally, smartphone ring is glued with double -sided tape, so it cannot be removed very easily.There are sticky gels that can be used repeatedly, but if dust is worn, you have to wash it.

スマホリングを取り付けたベースプレート

This base plate itself has a magnetic force and is used by adsorbing the Magsafe compatible iPhone.In this case, it can be removed repeatedly, removing it when charging, and attaching it when you need a smartphone ring.The base plate has a dent, and it is a structure that attaches a smartphone ring there, so it is often thought that the thickness is minimal.

I thought this was good, but unfortunately, if you put on a smartphone case, you will not have enough magnetic force and will not arrive.Of course, there is no problem if you wear it directly on the iPhone itself.Even if there was a case, I was expecting, "Would you like to arrive a little?", But that was not the case.However, the concept of "always removing smartphone ring" is hard to throw away.

Genuine silicon case is compatible with Magsafe

At last, I remembered that "the genuine silicon case was Magsafe compatible."I realized that "MAGSAFE compatible" was for such a time, so I immediately bought it at the Apple Store.The price is 6,050 yen.To be honest, I didn't want to make extra investment anymore, so I chose a genuine product that was safe.

MagSafe対応iPhone 12 Pro Maxシリコーンケース

iPhoneシリコンケースは純正が最高。MagSafe対応でリング脱着自在

First of all, it is "Magsafe compatible".In silicon cases that are not compatible with Magsafe, the thickness of the case itself hindered the thickness of the case itself, and the wireless charging may be unstable.The genuine silicon case for Magsafe has a built -in Magsafe ring in the case itself, so it does not hinder charging at all.

ケース内側にはMagSafeのマークがあります

There is also a production that displays a charging ring that can be called "Apple Certificate" when the case is installed, and makes you think "Oh!"MAGSAFE is displayed when the product is attached, and you can feel the difference between non -compatible products.By the way, in the Apple genuine silicon case, this production changes according to the color of the purchased case, and the art is fine.Of course, high -speed charging by Magsafe is also possible, and there is no disadvantage of wearing cases.

ケース装着時に表示されるアニメーション。製品との一体感が演出されます。ただ、筆者の場合は赤系統の色だったため、初めて見たとき「何かエラーが!?」と思ってしまいましたが

And I attached the base plate above, but of course I was able to attach it safely.Just as directly attached to the main unit without a case, it can be attached unexpectedly strongly, so you can use it without any concern when you want to operate your smartphone while sleeping.And when charging, you can easily remove it by pulling a little.This is useful.Thanks to this, the wireless charging stand for in -vehicle, which could not be charged with a case, can now be used without any problems.

ベースプレートを装着したところ。色が黒なのは購入時に使っていたケースが黒かったからです。別のカラーも販売されています普段はスマホリングとして十分使える強度がありながら、引っ張れば簡単に外すことができますそれほど厚みも増しません

As an aside, this base plate is originally attached directly to the main unit, but it is not recommended to use it.The grounding surface of the base plate is metal exposed, and if sand or some dust enters between the main unit during detachment, it is easy to "scratch the body".After all, it will stick with a good magnetic force, so if sand etc. enter between them, it will be miserable.However, from the top of the silicon case, I think it is difficult to make a scratch that is so interesting.

Silicon case is hard to fall

Originally, the aluminum bumper was an iron plate to protect the smartphone.The biggest reason was that it looked cool, but one of the reasons was that it could be put in and out smoothly without getting caught in the pocket.However, because I often put my smartphone in my chest pocket, it is a defect in the ball that falls off the pocket easily when I bend, and once it falls, it naturally scratches, and the bumper itself begins to distort it.It will be.

So recently, I started using silicon cases.Before using a silicon case, I imagined a "soft case with only silicon", but recently silicon cases are coated with silicon on hard TPUs, etc., which has a solid impression.The Apple's silicon case purchased this time is surprisingly rigid.

And the advantage is that even if you bend forward, it is hard to fall off the pocket.Even if the aluminum bumper is dropped, it will surprisingly "fluffy" in your pocket.There were many scenes where the dog was formed during the dog walk, and each time I dropped my smartphone, but the number of times I dropped it in a silicone case has decreased dramatically.When putting it in your pocket, it feels caught, but it is acceptable.

Silicon cases are not distorted even if dropped.It is hard to get scratches and it is hard to stand out.Instead, the dirt will not be soaked, and the color will change due to the deterioration of the material.This area will be trade -off.Also, I think the shock absorption power when dropped is inferior to a large bumper.However, the scene I drop from the pocket is usually on the ground and gravel of the soil, so there is no fatal injury at the moment.

In addition, the genuine silicon case is also a fun place to have a lot of color variations.The body of the iPhone 12 Pro Max has only four colors.Both are luxurious colors, but I wanted a bright color like the normal iPhone 12 series.A silicon case can be selected from 15 colors at this time, and you can also choose a completely different color from the original color of Pro Max.

バリエーションが豊富

I also dared to select a flashy "Electric Orange".To be honest, I don't think it matches the Pacific blue of the main unit, but I wasn't as worried as I thought because it was almost exposed except for the camera part.The bright orange is dazzling.It is easy to hold when you hold your smartphone in your hand, and it is also a point that the surface processing is smooth and the touch is good.

The inside of the case is often considered.The inside is lined with a microfiber and is soft.In the case of a cheap case, TPU may come out on the inside.If the case is used for a long time, dust will gradually enter between the body, so in a hard case, the dust may rub and damage the body.I hope that the lining of the microfiber will be somewhat less likely to be damaged.In the first place, it is a soft material, so the adhesion with the body is improved, so I think it may be difficult to enter dust.I don't know about this area unless I use it for a long time.

裏地はマイクロファイバー

Magsafe convenience and genuine product satisfaction

It is a story that I have to think that I should have bought a genuine product from the beginning, but as a result I am very satisfied.I realized again that Magsafe was a useful function other than charging.

The third -party silicon case that claims to be MAGSAFE is listed on Amazon, but it is important to note that not all are authenticated by Apple.Unexpected products cannot be charged high -speed.However, since the magnet function is available, I think that it is an ant for such purposes.

However, this product was very complete as a case.Not only MAGSAFE compatible, but also the production and feel of the production and touch, the lining, and it will satisfy the desire to own it.

In the end, I bought a genuine Magsafe charger, and it was a full life of Magsafe.After all, genuine products are good, but expensive.I was recognized again.I will not regret if I am satisfied even if it is expensive.Probably the next time you buy a new iPhone, you will buy a genuine silicon case at the same time.

清宮信志